Cerwin-Vega CVM-1224FXUSB manual Usb Audio Interface Mac Os

USB AUDIO INTERFACE (MAC OS X)

1.Connect the audio mixer to your MAC using a standard USB cable. The LED will light to indicate it is receiving USB power. The MAC will recognize the USB audio device and automatically install a universal driver.

2.To select the audio mixer as the computer’s audio input, open the System Preferences from the dock or the main Apple Menu.

3. Next open the Sound preference.

16

4.Now, click in the Input tab and select USB Audio CODEC. You may notice that the Volume slider sets itself to the full level. This will allow you to have full range using audio mixer hardware input level controls.

5.Next, click in the Output tab and select USB Audio CODEC. You may notice that the Volume slider sets itself to the full level. This will allow you to have full range using audio mixer hardware MAIN Volume control.

At this point you can begin using your audio mixer with most any audio recording software, but you need to select it as an input and output device within the DAW. When selecting the inputs and outputs just look for and select the USB Audio CODEC.