
7
PRESS
TO
RING
Includes visor clip.
Protector System® Safety Sensors:The Safety Sensors are intended for installation with the operators covered in this manual. To order call:
Low voltage wire is required to connect the transformer to the control box. Also can be used to connect optional safety sensors to the control box. UL approved for burial.
Low Voltage Wire (250')Low voltage wire is required to connect the transformer to the control box. Also can be used to connect optional safety sensors to the control box. UL approved for burial.
Wireless Gate DoorbellAllows guests to ring a doorbell in the house from the keypad. Homeowner can open gate from inside the home using the included remote control button. No wiring required. Keypad can be programmed to allow access to selected guests using a 4 digit code.
940D | SECURITY✚® Keyless Entry: |
| Enables homeowner to operate gate |
| operator from outside by entering a |
| four digit code on a specially designed |
| keyboard. |
956D | |
| SECURITY✚®: |
With key ring and fastening strip.
914GA Gate Arm Pin Lock:The pin lock kit is designed to prevent disconnection of the gate operator and the gate while providing a means to open the gate in case of power failure.
921GA | Vehicle Exit Sensor: |
One piece outdoor buried vehicle motion detector with sensing probe is housed in a small relay type housing so it is easy to integrate with gate, providing for free exit only.
Used to allow the gate operator to push the gate open.
922GA Gate Access System BatteryThe Gate Access System Battery is designed to add a battery for solar applications or as a replacement battery (includes cable harness).
45 | Operation and Maintenance |