Preparing your garage door
Before you begin:
o Disable locks
o Remove any ropes connected to garage door.
- Complete the following test to make sure your garage
door is balanced and isnot sticking or binding:
1 Lift the door about halfway as shown Release the
door. if balanced, it should stay in place, supported
entirely by its springs
2 Raise and lower the door tosee if there is any
binding or sticking
Ifyour door binds, sticks, or is out ofbalance, call a
trained door systems technician
Topreventpossible SERIOUSINJURYor DEATH:
- ALWAYSca!la trained door systemstechnicianif garage
doorbinds, sticks, or is outofbalance Anunbalanced
garagedoormay not reversewhen required
oNEVERtryto loosen,moveor adjustgaragedoor, door
springs,cables,pulleys,bracketsor theirhardware,a!; of
whichare underEXTREMEtension
° DisableALL locks andremoveALL ropes connectedto
garagedoorBEFOREinstallingandoperatinggaragedoor
openertoavoid entanglement.
Topreventdamageto garagedoorandopener:
•ALWAYSdisablelocksBEFOREinstallingand operating
theopener
• ONLYoperategaragedooropenerat!20V, 60Hz to avoid
malfunctionanddamage
Sectional Door
One-Piece Door Tools needed
During assembly, installation and adjustment of the opener,
instructions will call for hand tools asillustrated below
Step Ladder
Level(optional) _ Penc_f
Tape Measure
Wire Cutters
Drill 3/16', 5ft6"
_,_ and5/32"
and 1/4"
Hack Saw
Screwdriver
Adjustable EndWrench