mNSTALLATmON STEP t{)Elec*rical Requirements
To avoid installation difficulties, do not run the opener
at this time.
To reduce the risk of electric shock, your garage door
opener has a grounding type plug with a third grounding
pin, This plug will only fit into a grounding type outlet, If
the plug doesn't fit intothe outlet you have, contact a
qualified electrician to installthe proper outleL
TopreventpossibleSERIOUSINJURYor DEATHfrom
electrocutionor fire:
• DisconnectALLelectric and batterypower BEFORE
performingANYserviceor maintenance,
•Garagedoorinstallationandwiring MUSTbe in compliance
withALL localelectricaland building codes
•NEVERuseanextensioncord,2-wire adapter,or change
plugin anywayto makeitfit out]eL Be sure theopener
is grounded
PERMANF-NT WIRING
CONNECTION
If permanent wiring is required by your local code,
refer to the following procedure.
To make a permanent connection through the 7/8" (2 cm)
hole inthe top of the motor unit:
,, Remove the motor unit cover screws and set the cover
aside.,
*Remove the attached 3-prong cord.
° Connect the black (line) wire to the screw on the brass
terminal; the white (neutral) wire to the screw on the
silver terminal; and the ground wire to the green ground
screw.,The opener must be grounded,
° Reinstall the cover,
To avoid installation difficulties, do not run the opener
at this time.
GroundTab
Green
GroundS_ew
GroundWire Wire
Black Wire
2O