3.3 Programming a Sequence
Once you have programmed memories you can store them in sequences and replay these either manually, to a beat, triggered by sound or by setting the speed.
To store a sequence go to the following menu:
Page01 | Run 2 |
Flash On | ProgMem |
Sound Off | ProgSeq |
Dir Fwd | More.. |
|
|
Select the ProgSeq soft key. This will take you to the following menu:
Program Sequence 01
Back | (000 Steps) |
Up |
|
Down | Select |
It is possible to store up to 12 Sequences each of 250 steps. To select a different sequence number use the Up or Down soft keys to select the number you want. If the number next to Steps has a value other than 000 then it has already had memories stored in it.
To program the sequence press the soft key associated with Select. You now have two options, Auto Seq or Steps.. If you use Auto Seq it will use all the recorded memories to make up a sequence. If you select Steps you can make up your own sequence. Selecting Steps.. will take you to the following screen:
Step 001 | Seq05 |
Back |
|
| Insert Step |
|
|
This will take you to the following screen:
Page01 | Step 001 |
Back |
|
Page+ |
|
Page- |
|
|
|
Use the Page + or Page – keys to take you to the page that the memory you want is on. Select the memory by pushing the flash button the memory is stored on. Flash buttons that have memories stored on them will have the Yellow LED lit. Each time you press a flash button the number of steps will increment by 1. You will see the change in the top right hand corner of the LCD display.
12
