8 Super User Functions
The Tiger Console has a set up menu that is not accessible during usual operation. The functions available in this mode are generally only used when setting the console up for personal preferences. There are three super user menus, the More..
It is accessed while the LCD display is on the main menu:
Run 1 | ||
|
| Page Chase |
Page+ |
| Live! |
Page- |
| More.. |
|
|
|
To access the Super User menu hold down the two top
| Super User |
Back | Lock |
Clear Mem/Seq | Reset |
Startup@Last | More.. |
|
|
The Back
8.1 Clear all Memories and Sequences
Selecting the Clear Mem/Seq
Do not press OK unless you are sure that you no longer need the current show stored on the console!
8.2 Start Up Mode
This option allows the user to set the desk, so that at power up it either recovers the sequence step that it was last on or resets the current sequence back to step one. To restore to the last output step the bottom left line on the LCD display should read Startup@Last. If it reads Start@1 the currently selected sequence will restart at step 1. To toggle between these two choices use the
Usually if you are running a theatrical type show manually stepping through the show you would set the function to Startup@Last. If for some reason the power fails the console on powering back up will be on the correct memory.
The Startup@Last function will only work when the sequence is being operated in manual mode. It will not function if the sequence is operating in Auto, Beat or Sound mode.
33