9 Connections
There are five connections on the rear panel of the Tiger Console.
9.1 Power Connection
A four pin ring locking DIN connector is provided for the connection of a remote power supply.
DC Connections:
Pin 1 – + 10 Volts @ 400mA (650mA)
Pin 2 – 0 Volts signal ground
Pin 3 – +20 Volts @ 200mA
Pin 4 – Not Used
9.2 Remote Go/Step Input
A ¼ inch Jack input shall be provide for the use of a remote go. Closing the connection between the tip and the sleeve shall trigger a step.
36
