3 Quick Start
This section will assume that you are turning the console on for the first time and you have not assigned or patched any fixtures.
3.1 Set-up
When you turn the console on you will see the following screen on the LCD:
Page01 | Run 1 |
| PageChase |
Page+ | Live! |
Page- | More.. |
|
|
PageChase will only be visible of there are memories recorded on the page.
The first thing that we need to do is to assign the fixtures that we have and then patch these and any dimmers. To do this you need to press the More.. key twice.
This will take you to the following menu screen:
Page01 | Run 3 |
View/Pvw | Blackout |
Assign/Patch |
|
Load/Save | More.. |
Select the Assign/Patch
| Assign/Patch |
Back | FixtProfiles |
Fixtures | AutoPatch |
Generics | Aux‟s |
The first thing we will do is assign and patch a fixture. Select the Fixtures softkey. You will now see the following screen:
| Fixture 01 |
|
← |
|
|
+ | Unassigned |
|
- | DMX: | Edit |
|
|
|
Select the Edit Key. The screen now shows:
| Assign Fixture | 03 |
← |
|
|
< | Unassigned | > |
DMX: |
| OK |
|
|
|
8
