Installation Instructions | CM2 | |
NOTE: With the mount configured for the display and the |
| |
| display installed, it is now possible to calculate the | Cover |
| minimum I.D of the cabinet. | |
Determining Minimum I.D. of Furniture |
| |
1. | Measure and record distance "A" in figure below. |
|
| (See figure 16) |
|
2. | Measure and record distance "B" from figure below. This is |
|
| the material thickness of the cover that will be mounted to |
|
| the CM2. (See figure 16) |
|
3. | Add measurements from step one and two together. The |
|
| total is the minimum inside height of the furniture. |
|
4. | Measure and record distance "C" in figure below. This |
|
| dimension is from the back side of the CM2 vertical |
|
| mounting bracket to the furthest point forward on the |
|
| display. (See figure 16) |
|
| CAUTION: IMPROPER FIT TOLERANCES CAN CAUSE | Base |
| AREAS OF MOUNT OR FURNITURE TO COLLIDE WHEN |
|
| OPERATING THE MOUNT CAUSING SERIOUS DAMAGE |
|
TO EQUIPMENT! Always provide for adequate tolerances | Figure 15 |
when building cabinet esopecially between base and cover.
(See figure 15)
WARNING: EXCEEDING STATED WEIGHT LIMITS OF
THE CM2 CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! The weight of furniture cover must be calculated into the total weight being placed on the mount a total not exceed 180lbs (82 kg) the maximum capacity of the CM2.
| C |
B | C |
| A |
Figure 16
9
