Cino END, PROGRAM, (SYSLIST), FIN (Finish), User Default, Master Default, Factory Default, Save User Default, PowerTool Host Link, System Information List

Programming Manual

FuzzyScan

Appendix

System Commands

PROGRAM	System Information List
(Enter Programming Mode)	(SYSLIST)
	Save User Default
FIN (Finish)	PowerTool Host Link
	User Default
END	Factory Default
(Exit Programming Mode)

Master Default

￿ Factory Default: After scanning” Factory Default” command, all parameters will be returned to factory default value.

￿Master Default: After scanning “Master Default” command, the scanner will remain the pre-set parameters of Host Interface Selection, Keyboard Interface Control (except Record Suffix; Preamble; Postamble), Serial Interface Control (except Record Suffix; Preamble; Postamble), and Wand/Laser Emulation Control, the rest of parameters will be returned to default value.

￿User Default: After scanning” Save User Default” command, all current parameters will be stored to the flash memory. Once you change the parameter and would like to return to previous setting, please scan “User Default”.

59