3.Using caution, push in the tabs for the lock buttons located on each slide rail that is mounted on the disk enclosure (Figure 13), and slide the enclosure in until the lock buttons fit securely into the mating holes in the flange mount. You should hear a click when the lock buttons slide into the mating holes.

WARNING Be very careful not to pinch fingers when completing this step.

Front Channel Mount

Stationary Flange Mount

Stationary

Flange Mount

Front Mounting

Screws

Tab for Lock Button

Enclosure

Slide Rail mounted on Disk Enclosure

2247

Figure 13. Adjusting Lock Buttons on Slide

4.Open the side doors and push the lock buttons. Slide enclosure into position

5.Repeat steps 1 - 4 for each enclosure.

Chapter 2: Installing in a Ciprico Rack

19

Page 19
Image 19
Ciprico 21021625 B manual Adjusting Lock Buttons on Slide