Installing Slide Rails on a Disk Enclosure
1.Unpack the generic disk enclosure installation kit.
2.Slide the right and left intermediate slide rails forward until the back lock button mating hole stops at the back lock button.
3.Slide both enclosure slide rails forward until the front lock buttons stop at the front lock button mating holes. Push the front lock button to release the enclosure slide rail, and remove both enclosure slide rails from the intermediate slide rails. See Figure 17.
Stationary Flange Mount
Back Side of Front
Lock Button
Enclosure Slide Rail
Back Lock Button
Mating Hole for Front Lock Button
Intermediate Slide Rail
2601
Figure 17. Generic Disk Enclosure Installation Kit Slides
4.Push the back lock buttons and position the intermediate slide rails back in the center of both stationary flange mounts.
Chapter 3: Installing in a Generic Rack | 27 |
