Overview
This chapter provides instructions for installing disk enclosures, controller enclosures, and cache retention units (CRUs) in a Ciprico FibreSTORE RAID rack.
If you purchased your rack from a company other than Ciprico, see Chapter 3, Installing in a Generic Rack.
After reading the safety issues and preparing the installation site (see Chapter 1), complete the following steps to install the FibreSTORE RAID systems in a Ciprico rack:
1.Prepare the rack.
2.Install the CRUs.
3.Install the disk enclosures.
4.Install the controller enclosures.
5.Mount the filler panels.
Install all components as specified in Supported Rack Configurations: Configuration for One RAID System (AAMK36A) on page 6; Configuration for Two RAID Systems (AAMK36A2) on page 7; Configuration for Three RAID Systems (AAMK36A3) on page 7; Configuration for Four RAID Systems (AAMK36A4) on page 8
12FibreSTORE RAID System: Rack Installation Guide
