Cisco Systems 3120 manual Console Port, Pin Signal Definition, Parameter Setting

Chapter 1 Product Overview

Ports and Connectors

Console Port

The AVS 3120 has one serial port located on the rear panel that operates as the console port. The integrated serial port uses a RJ-45 connector. Figure 1-6shows the pin number assignments for the port.

Refer to Table 1-2for the console port connector pinouts.

Figure 1-6 RJ-45 Serial Console Port Pinouts

87654321

RJ-45 connector

H2936

Table 1-2	Console Port Connector Pinouts
Pin		Signal	I/O	Definition
1		CTS	I	Clear to send
2		DSR	I	Data set ready
3		RxD	I	Receive data
4		GND	N/A	Signal ground
5		GND	N/A	Signal ground
6		TxD	O	Transmit data
7		DTR	O	Data terminal ready
8		RTS	O	Request to send

The console port operates at the settings outlined in Table 1-3. These settings are not user-configurable.

Table 1-3	AVS 3120 Console Port Settings
Parameter		Setting
Baud		9600
Data Bits		8
Parity		None
Stop Bits		1
Terminal Type		VT100/ANSI
Flow Control		None

Cisco AVS 3120 Application Velocity System Hardware Installation Guide

1-6 OL-11805-01