DPR2320 and EPR2320 Front Panel Description

DPR2320 and EPR2320 Front Panel Description

The front panel of your cable modem gateway provides LED status indicators that indicate how well and at what state your cable modem gateway is operating. See DPR2320 and EPR2320 Front Panel Status Indicator Functions (on page 116), for more information on front panel LED status indicator functions.

1POWER—Illuminates solid green to indicate that power is being applied to the cable modem gateway

2RECEIVE DATA—Blinks to indicate that the cable modem gateway is receiving data from the cable network

3SEND DATA—Blinks to indicate that the cable modem gateway is sending data to the cable network

4CABLE—Illuminates solid green when the cable modem gateway is registered on the network and fully operational. This indicator blinks to indicate one of the following conditions:

-The cable modem gateway is booting up and not ready for data

-The cable modem gateway is scanning the network and attempting to register

-The cable modem gateway has lost registration on the network and will continue blinking until it registers again

5PC—Illuminates solid green to indicate that an Ethernet/USB carrier is present and blinks to indicate that Ethernet/USB data is being transferred between the PC and the cable modem gateway

6PC Wireless—Illuminates solid green to indicate that a wireless access point is enabled and blinks to indicate that wireless data is being transferred over the wireless connection

Note: After the cable modem gateway is successfully registered on the network, the POWER (LED 1) and CABLE (LED 4) indicators illuminate continuously to indicate that the cable modem gateway is online and fully operational.

4011533 Rev A

13