| How Do I Configure the Cable Modem Gateway? | |
|
|
|
Field Name | Description |
|
Static IP | Manual entry is required. Your ISP will provide the |
|
Mask | information for you to enter into this field. |
|
|
|
|
Default | Manual entry is required, your ISP will provide the |
|
Gateway | information for you to enter into this field. |
|
|
|
|
Primary DNS | Manual entry is required. Your ISP will provide the |
|
(static IP | information for you to enter into this field. |
|
only) |
|
|
|
|
|
Secondary | Manual entry is required. Your ISP will provide the |
|
DNS | information for you to enter into this field. |
|
(static IP |
|
|
only) |
|
|
|
|
|
Function Keys
The following function keys appear on the Setup Basic Settings - Network Configuration page.
Key | Description |
Renew WAN | Forces a release and renewal of your WAN IP address |
IP Address |
|
Lease |
|
|
|
Apply | Saves the values you enter into the fields without closing the |
| screen |
|
|
Configuring and Managing IP Addresses
Use the Setup Basic Settings - IP Management page to configure how your system manages and assigns IP addresses in your network.
Note: If you are not familiar with the IP management procedures detailed in this section, contact your service provider before you attempt to change any of the cable modem gateway default IP management settings.
Click LAN IP Address Management in the Basic Settings section of the Setup page to access the Setup Basic Settings - IP Management page.
4011533 Rev A | 59 |