How Do I Configure the Cable Modem Gateway?
Setup Page Section Headings
The Setup page is divided into the following section headings:
Basic Settings
Advanced Settings
Firewall
Parental Control
Virus Protection
Wireless
In the Setup page, click the selections listed within these sections to access the WebWizard page for that selection. A description of the selections available in each section follows next.
Basic Settings
The following table provides a description of the pages available from within the Basic Settings section of the Setup page.
Field Name | Description |
Password Settings | Use this page to set or modify your password settings |
|
|
Set Time | Use this page to enable or disable time synchronization |
| by Network Time protocol |
|
|
Network Configuration | Use this page to enter or modify the basic settings for |
| your network |
|
|
LAN IP Address | Use this page to configure how Internet protocol (IP) |
Management | addresses are assigned and managed in your network |
|
|
Fixed CPE IP Assignment | Use this page to reserve IP addresses in the DHCP pool |
| that will be used as static IP addresses in your local |
| network. |
|
|
Restart Modem | Use this page to restart your cable modem gateway |
|
|
Save Configuration to | Use this page to save your cable modem RG |
your PC | configuration to your local PC and to restore the RG |
| configuration to your cable modem gateway, if |
| necessary |
|
|
4011533 Rev A | 47 |