DPR2325 and EPR2325 Back Panel Description

DPR2325 and EPR2325 Back Panel Description

The following illustration shows the description and function of the back panel components of the DPR2325 and EPR2325.

Important! Do not connect your PC to both the Ethernet and USB ports at the same time. Your modem will not function properly if both the Ethernet and USB ports are connected to your PC at the same time.

1ANTENNA—Provides a communication connection for the built-in wireless access point (WAP) to allow wireless devices to communicate with the cable modem

2POWER—Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

CAUTION:

Avoid damage to your equipment. Only use the AC power cord that is provided with your cable modem gateway.

3RESET—Activating this switch resets the cable modem gateway to factory default values and reboots the cable modem gateway

Note: This switch is for maintenance purposes only. Do not use unless directed to do so by your service provider.

4ETHERNET—Four RJ-45 Ethernet ports connect to the Ethernet port on your PC or to an Ethernet hub on your home network

5USB—12 Mbps USB port connects to the USB port on your PC

6CABLE—F-Connector connects to an active cable signal from your service provider

16

4011533 Rev A