DPR2325 and EPR2325 Front Panel Description
DPR2325 and EPR2325 Front Panel Description
The front panel of your cable modem gateway provides LED status indicators that indicate how well and at what state your cable modem gateway is operating. See DPR2325 and EPR2325 Front Panel Status Indicator Functions (on page 116), for more information on front panel LED status indicator functions.
1POWER—Illuminates solid green to indicate that power is being applied to the cable modem gateway
2RECEIVE DATA—Blinks to indicate that the cable modem gateway is receiving data from the cable network
3SEND DATA—Blinks to indicate that the cable modem gateway is sending data to the cable network
4CABLE—Illuminates solid green when the cable modem gateway is registered on the network and fully operational. This indicator blinks to indicate one of the following conditions:
-The cable modem gateway is booting up and not ready for data
-The cable modem gateway is scanning the network and attempting to register
-The cable modem gateway has lost registration on the network and will continue blinking until it registers again
5Ethernet (1-4)—Illuminates solid green to indicate that an Ethernet carrier is present and blinks to indicate that Ethernet data is being transferred between the PC and the cable modem gateway
6USB—Illuminates solid green to indicate that a USB carrier is present and blinks to indicate that data is being transferred on a USB connection to the cable modem gateway
7PC Wireless—Illuminates solid green to indicate that a wireless access point is enabled and blinks to indicate that wireless data is being transferred over the wireless connection
Note: After the cable modem gateway is successfully registered on the network, the POWER (LED 1) and CABLE (LED 4) indicators illuminate continuously to indicate that the cable modem gateway is online and fully operational.
