How Do I Configure the Cable Modem Gateway?
Setup Advanced Settings - IP Filtering Page Description
Use this page to specify and enable a range of IP addresses that cannot have access to the Internet. Click Apply to apply and save your new IP address filter settings.
Configuring MAC Address Filters
Use the Setup Advanced Settings - MAC Filtering page to configure MAC address filters. These filters allow you to deny or block access to the Internet by the individual MAC addresses listed in the table. You can also prevent individual PCs from sending outgoing TCP/UDP traffic to the WAN using their MAC address.
Note: If you are not familiar with the advanced settings detailed in this section, contact your service provider before you attempt to change any of the cable modem gateway default advanced MAC filtering settings.
Click MAC Address Filtering in the Advanced Settings section of the Setup page to access the Setup Advanced Settings - MAC Filtering page.
4011533 Rev A | 69 |