Table 1 | Startup Wizard Information (continued) |
| |
|
| ||
Wizard Setting | Action | ||
|
| ||
WLAN SSID | The network name, or service set identifier | ||
|
| (SSID). This is the default SSID that the access | |
|
| points use when they join a controller. | |
|
| ||
RADIUS Server IP Address | The IP address of the RADIUS server if one is | ||
|
| available and you intend to use it. If you are using | |
|
| a RADIUS server, the following fields must be | |
|
| completed: | |
|
| • Shared secret format (ASCII or HEX) | |
|
| • | Shared secret |
|
| • | Confirm shared secret |
|
| • RADIUS server port (default port is 1812) | |
|
| • Server status (enabled or disabled) | |
|
| ||
802.11b Network Status | Check the checkbox to enable or disable the | ||
|
| 802.11b radio network. The default is Enabled. | |
|
| ||
802.11g Network Status | Check the checkbox to enable or disable the | ||
|
| 802.11g radio network. The default is enabled. | |
|
|
| |
| Check the checkbox to enable or disable | ||
|
| automatic radio resource management. The | |
|
| default is enabled. | |
|
|
|
|
10
