Cisco Systems 535 user service Before Installing the PIX, Mounting the PIX

Chapter 7 PIX 535

Installing the PIX 535

Table 7-3lists the relative throughput of the Gigabit Ethernet combinations.

Table 7-3 Relative Throughput of Gigabit Ethernet Combinations

		Shared with
Gigabit Ethernet Card	Bus Type	33 MHz Device	Speed
PIX-1GE-66	64/66	No	100%
PIX-1GE-66	64/66	Yes	50%
PIX-1GE-66	32/33	No	25%
PIX-1GE	64/66	No	50%
PIX-1GE	32/33	No	25%

Installing the PIX 535

This section includes the following topics:

•Before Installing the PIX 535, page 7-5

•Mounting the PIX 535, page 7-5

•PIX 535 Network Interface Installation, page 7-6

Before Installing the PIX 535

Observe the following before installing the PIX security appliance:

•Review the safety precautions outlined in the Regulatory Compliance and Safety Information document.

•Place the PIX security appliance on a stable work surface.

Mounting the PIX 535

To mount the PIX 535 on a rack, perform the following steps:

Step 1 Attach the mounting brackets to the unit using the supplied screws.

Step 2 Attach the brackets to the holes near the front on both sides of the unit.

Step 3 Attach the unit to the equipment rack.

Cisco PIX Security Appliance Hardware Installation Guide

78-15170-03 7-5