Chapter 46 Configuring Cisco IP Phones in Cisco CallManager

Configuring Directory Numbers

Related Topics

Adding a Directory Number, page 46-19

Deleting a Directory Number, page 46-23

Updating a Directory Number, page 46-24

Shared Line Appearances, page 46-25

Adding a Directory Number

Follow these instructions to add a directory line to a specific phone.

Before You Begin

You must add a Cisco IP Phone to Cisco CallManager before adding a directory line. See the “Adding a Phone” section on page 46-7for details.

Procedure

Step 1 Open Cisco CallManager Administration.

Step 2 Select Device > Phone.

The Find and List Phones page displays.

Step 3 Enter search criteria to locate a specific phone.

A list of discovered devices appears.

Step 4 Select Device Name.

The Phone Configuration page displays, with the lines listed on the left side. Step 5 Select an unassigned line (Line 1, Line 2, and so on).

The Configure a Directory Number page displays in a separate window. Step 6 Enter the appropriate settings as described in Table 46-2.

 

 

Cisco CallManager Administration Guide

 

 

 

 

 

 

78-10450-02

 

 

46-19

 

 

 

Page 19
Image 19
Cisco Systems 78-10450-02 manual Adding a Directory Number, 46-19