Cisco Systems 78-10450-02 manual Field Description Usage Notes Device Information, 46-8

Chapter 46 Configuring Cisco IP Phones in Cisco CallManager

Configuring Cisco IP Phones

•H.323 clients can be Symbol NetVision phones or Microsoft NetMeeting clients.

Step 5 Enter the appropriate settings as described in Table 46-1.

These settings are not available for all phone types. Only the settings appropriate to the selected phone type will appear on your screen.

Table 46-1 IP Phone Configuration Settings

Field		Description	Usage Notes
Device Information
MAC Address		Media Access Control (MAC)	• Value must be 12 hexadecimal
		address that identifies	characters.
		Cisco IP Phones (hardware	• This field is only displayed for
		phones only)
			hardware Cisco IP Phones
		Refer to the “Displaying the
		MAC Address of a Phone”
		section on page 46-6.
Device Name		Identifies software-based	• Value can include 1 to 15 characters,
		telephones.	including alphanumeric, dot, dash, or
			underscores.
			• Only available for H.323 clients and
			CTI ports
Description		Clarifies the purpose of the
		device.
Load Information		Specifies custom software for a	The value entered here overrides the default
		Cisco IP Phone.	values for this type of device. Refer to the
			“Setting Device Defaults” section on
			page 15-1.
Device Pool		Defines sets of common	The value entered here overrides the default
		characteristics for devices, such	value for this type of device. Refer to the
		as region, date/time group,	“Setting Device Defaults” section on
		Cisco CallManager group, and	page 15-1.
		calling search space for
		auto-registration
	Cisco CallManager Administration Guide
46-8			78-10450-02