Cisco Systems 80O SERIES guide

Chapter 2 Installation

Installing Your Router

Table 2-2 Connecting Ethernet Devices (continued)

			Router HUB/NO	Network
			HUB, TO	Device
Network Device		Ethernet Cable	HUB/TO PC	Button
Connected to Router	Router Port	Type1	Button Setting	Setting2
Server, PC, or	Cisco 801 and 802	Straight-through	OUT	N/A
workstation	routers: Ethernet port
	Cisco 803 and 804
	routers: Ethernet port Ø

Server, PC, or	Cisco 802 IDSL router:	Straight-through	OUT	N/A
workstation	Ethernet port
	Cisco 804 IDSL router:
	Ethernet port 1

Server, PC, or	Cisco 803 and 804	Straight-through	N/A3	N/A
workstation	routers:
	Ethernet ports 1, 2, 3

Server, PC, or	Cisco 804 IDSL router:	Straight-through	N/A4	N/A
workstation	Ethernet ports 2, 3, 4

1.Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For details on cables, refer to Appendix B, “Specifications and Cables.”

2.Hub vendors choose different names for the button controlling cable selections. This table uses the Cisco 1528 Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. Refer to your hub documentation for details.

3.On Cisco 803 and Cisco 804 routers, the HUB/NO HUB button affects only Ethernet port Ø.

4.On Cisco 804 IDSL routers, the TO HUB/TO PC button affects only Ethernet port 1.

Cisco 800 Series Routers Hardware Installation Guide

	78-5373-04	2-7

Image 29

Cisco Systems 80O SERIES manual Connected to Router Router Port Type Button Setting

Contents

Cisco 800 Series Routers Hardware Installation Guide Page Cisco 800 Series Routers Hardware Installation Guide Page N T E N T S Mounting on a Table Organization AudienceConventions Vii Viii Cisco.com Obtaining DocumentationDocumentation DVD Ordering Documentation Cisco Product Security Overview Reporting Security Problems in Cisco ProductsDocumentation Feedback Cisco Technical Support Website Obtaining Technical Assistance Definitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information Xii Xiii Xiv Overview Feature Routers Description Feature Summary Router Ethernet Ports Isdn Ports Telephone Ports Router Ports SummaryFront Panels Link LED Ethernet port Isdn BRI S/T port Back Panels Cisco 802 Router Back Panel Cisco 804 Router Back Panel Color Function LEDs CH1 RXD CH1CH1 TXD CH2 Installation European Union Statements Safety Isdn S/T Ports Statement Preventing Electrostatic Discharge DamageNetwork Termination Point Statement Unpacking Your Router Preinstallation ActivitiesPreventing Router Damage Installing Your Router Network Connecting Ethernet DevicesDevice Network Device Ethernet Cable Connected to Router Router Port Type Button Setting Connecting Hubs Connecting a Server, PC, or Workstation Connecting an Isdn Line to Cisco 801 and Cisco 803 Routers Connecting an Isdn Line NT1 Connecting an Isdn Line to Cisco 802 and Cisco 804 Routers Isdn Connecting an Idsl Line Connecting the Idsl Cable to Cisco Idsl Routers Connecting a Digital Telephone Connecting an Analog Telephone, Fax, or Modem Vendor Name Product Name For More Information Connecting Terminal or PC Connecting a Terminal or PC Mounting on a Table Connecting the Power SupplyMounting Your Router 11 Wall-Mounting Brackets Bottom of Router Mounting on a Wall Installation Verifying Installation Verifying Installation Power/Link LEDs To Check Normal Patterns Where to Go from Here Troubleshooting Symptom Problem Solutions Problems During First Startup Symptom Problems After First StartupTo HUB/TO PC LINE, CH1, CH1 RXD Correctly, see the Connecting a Digital Problems After Router Is Running CH1 RXD, CH1 TXD, CH2 CH1, CH1 RXD, CH1 TXD When Contacting Your Cisco Reseller Page Isdn and Idsl Concepts Page Description Design Specification System Specifications TX+ RX+ Port Connector PinoutsButton OUT Pin Position RX+ TX+ Pin Function Button Pin OUT Position RTS DTR TXD GND RXD DSR CTS Tip TXD+ RXD+ ROF RTN Cabling Specifications Maximum Cable Distances Ethernet Cable SpecificationsType Category Shielding 10BASE-TPage GL-1 Numerics GL-2 GL-3 GL-4 IN-1 D E IN-2 Modem, connecting Mounting the router IN-3 Illustrated Settings Troubleshooting IN-4