Cisco Systems 80O SERIES manual Where to Go from Here

Chapter 2 Installation

Where to Go from Here

Table 2-4 Verifying Installation (continued)

Power/Link	LEDs To Check	Normal Patterns
To digital	LINE, CH1, CH1 RXD, CH1	• LINE, CH1, and CH2: On. CH1 or CH2 is
telephone	TXD, CH2, CH2 RXD, and CH2	on when the router has an active voice
	TXD	connection.
		• CH1 RXD, CH2 RXD: Blinking when
		indicated ISDN B channel receives a
		packet.
		• CH1 TXD, CH2 TXD: Blinking when
		indicated ISDN B channel sends a packet.
To analog	PH1 and PH21	On when telephone, fax, or modem is in use.
telephone, fax, or
modem

1. You can also pick up the handset and listen for a dial tone.

Where to Go from Here

You have completed the hardware installation and are ready to configure the software. Cisco strongly recommends that inexperienced network administrators use the Cisco 800 Fast Step application. Use the Cisco 800 Fast Step CD-ROM and online help. If you are an experienced network administrator and want to use the CLI to configure the software, refer to the Cisco 800 Series Routers Software Configuration Guide.

Cisco 800 Series Routers Hardware Installation Guide

2-22 78-5373-04