Cisco Systems 9266CV-8i, C220 LED Name, Front Panel LEDs, Definitions of States continued

Models: UCSRAID9266CV C220 9266CV-8i UCSSP6C220E UCUCSEZC220M3S

1 124
Download 124 pages 40.24 Kb
Page 39
Image 39
Front Panel LEDs, Definitions of States (continued)

Chapter 3 Maintaining the Server

Status LEDs and Buttons

Table 3-1

Front Panel LEDs, Definitions of States (continued)

 

 

 

 

LED Name

 

State

 

 

 

 

System status

 

Green—The server is running in normal operating condition.

 

 

Green, blinking—The server is performing system initialization and memory check.

 

 

Amber, steady—The server is in a degraded operational state. For example:

 

 

Power supply redundancy is lost.

 

 

CPUs are mismatched.

 

 

At least one CPU is faulty.

 

 

At least one DIMM is faulty.

 

 

At least one drive in a RAID configuration failed.

 

 

Amber, blinking—The server is in a critical fault state. For example:

 

 

Boot failed.

 

 

Fatal CPU and/or bus error is detected.

 

 

Server is in over-temperature condition.

 

 

 

Fan status

 

Green—All fan modules are operating properly.

 

 

Amber, steady—One fan module has failed.

 

 

Amber, blinking—Critical fault, two or more fan modules have failed.

 

 

Temperature status

Green—The server is operating at normal temperature.

 

 

Amber, steady—One or more temperature sensors have exceeded a warning

 

 

threshold.

 

 

Amber, blinking—One or more temperature sensors have exceeded a critical

 

 

threshold.

 

 

Power supply status

Green—All power supplies are operating normally.

 

 

Amber, steady—One or more power supplies are in a degraded operational state.

 

 

Amber, blinking—One or more power supplies are in a critical fault state.

 

 

Network link activity

Off—The Ethernet link is idle.

 

 

Green—One or more Ethernet LOM ports are link-active, but there is no activity.

 

 

Green, blinking—One or more Ethernet LOM ports are link-active, with activity.

 

 

 

Hard drive fault

 

Off—The hard drive is operating properly.

 

 

Amber—This hard drive has failed.

 

 

Amber, blinking—The device is rebuilding.

 

 

Hard drive activity

Off—There is no hard drive in the hard drive sled (no access, no fault).

 

 

Green—The hard drive is ready.

 

 

Green, blinking—The hard drive is reading or writing data.

 

 

 

 

Cisco UCS C220 Server Installation and Service Guide

 

OL-25760-01

3-3

 

 

 

Page 39
Image 39
Cisco Systems 9266CV-8i, UCSSP6C220E, UCUCSEZC220M3S LED Name, Front Panel LEDs, Definitions of States continued