Cisco Systems 9266CV-8i, C220 manual DIMM Replacement Procedure, PCIe Slots, Maintaining the Server

Contents

C H A P T E R 3	Maintaining the Server	3-1
	Server Monitoring and Management Tools						3-1
	Cisco Integrated Management Interface (CIMC) 3-1
	Server Configuration Utility				3-1
	Status LEDs and Buttons		3-2
	Front Panel LEDs	3-2
	Rear Panel LEDs and Buttons				3-4
	Internal Diagnostic LEDs			3-6
	Preparing for Server Component Installation						3-7
	Required Equipment		3-7
	Shutting Down and Powering Off the Server							3-7
	Removing and Replacing the Server Top Cover							3-8
	Replaceable Component Locations					3-9
	Serial Number Location			3-10
	Color-Coded Touch Points			3-10
	Installing or Replacing Server Components						3-11
	Replacing Hard Drives or Solid State Drives							3-12
	Drive Population Guidelines					3-12
	Drive Replacement Procedure					3-13
	Replacing a Drive Backplane				3-14
	Replacing Fan Modules			3-16
	Replacing DIMMs		3-18

	Memory Performance Guidelines and Population Rules						3-18
	DIMM Replacement Procedure 3-22
	Replacing CPUs and Heatsinks			3-23
	Replacing the Motherboard RTC Battery				3-28
	Replacing a Mezzanine Card			3-29
	Replacing a PCIe Riser	3-31
	Replacing a PCIe Card	3-33
	PCIe Slots 3-33
	Replacing a PCIe Card		3-34
	Special Considerations for Cisco UCS Virtual Interface Cards							3-35
	RAID Controller Card Cable Routing				3-35
	Installing Multiple PCIe Cards and Resolving Limited Resources							3-36
	Replacing a Cisco Flexible Flash Card				3-38
	Overview of the Pre-Installed Cisco Flexible Flash Card						3-38
	Enabling a Cisco Flexible Flash Virtual Drive					3-39
	Booting a Cisco Flexible Flash Virtual Drive					3-39
	Monitoring and Managing a Cisco Flexible Flash Card						3-40
	Cisco UCS C220 Server Installation and Service Guide
iv								OL-25760-01