© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 48 of 70
Relevant configurations done on the MA3 switch in this case are given in the following:
wireless mobility controller ip 20.1.3.2 public-ip 20.1.3.2
wireless management interface Vlan604
wlan Predator 1 Predator
aaa-override
client vlan 701
security wpa wpa2 ciphers tkip
security dot1x authentication-list ise
no shutdown
ap cdp
where 20.1.3.2 is the switch/wireless management IP address of the mobility controller switch, VLAN 604 is the
wireless management interface, and VLAN 701 is the client VLAN on the mobility agent switch operating in routed
access mode.
Now assume that business is good and the company experiences growth more than ever. What started as a small
branch has evolved to be a larger branch with a deployment need of scaling to more than 50 access points. With
just one mobility controller switch in the branch, the deployment is limited to 50 access points. The network
administrator can configure another Cisco Catalyst 3850 Switch to operate as an mobility controller to support a
similar deployment of 50 access points. (See Figure 16.)
Figure 16. Multiple Mobility Controller Configuration on Cisco Catalyst 3850