Cisco Systems C3850NM410G - page 65

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 65 of 70
wlan Predator
shutdown
no mobility anchor sticky
no shutdown
Tracking the initial client join on MA1:
MA1#show wireless client summary
Number of Local Clients : 2
MAC Address AP Name WLAN State Protocol
--------------------------------------------------------------------------------
b065.bdb0.a1ad 3602I_G1/0/1_66BC 1 UP 11n(5)
b065.bdbf.77a3 3602I_G1/0/1_66BC 1 UP 11n(5)
MA1#show wcdb database all
Total Number of Wireless Clients = 2
Clients Waiting to Join = 0
Local Clients = 2
Anchor Clients = 0
Foreign Clients = 0
MTE Clients = 0
Mac Address VlanId IP Address Src If Auth Mob
-------------- ------ --------------- ------------------ -------- -------
b065.bdbf.77a3 500 20.1.1.54 0x00DC7DC000000005 RUN LOCAL
b065.bdb0.a1ad 500 20.1.1.55 0x00DC7DC000000005 RUN LOCAL
The mobility controller (MC1) has the client visibility at this time and looks like the following:
MC1#show wireless mobility controller client summary
Number of Clients : 2
State is the Sub-Domain state of the client.
* indicates IP of the associated Sub-domain
Associated Time in hours:minutes:seconds
MAC Address State Anchor IP Associated IP Associated Time
--------------------------------------------------------------------------------
b065.bdb0.a1ad Local 0.0.0.0 20.1.5.2 00:01:04
b065.bdbf.77a3 Local 0.0.0.0 20.1.5.2 00:02:40
Note that the anchor IP is 0.0.0.0 since it is a initial client join on 20.1.5.2.
Consider the client roams from MA1 to an access point connected to MA2, and notice the change that happens in
this type of nontunneled L2 roam.