© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 70
I - Awaiting IIF ID allocation
P - Pushed Session (non-transient state)
R - Removing User Profile (multi-line status for details)
U - Applying User Profile (multi-line status for details)
X - Unknown Blocker
The following output shows the detailed view of the wireless client session:
Switch#sh access-session mac b065.bdb0.a1ad details
Interface: Capwap0
IIF-ID: 0xE49A0000000008
MAC Address: b065.bdb0.a1ad
IPv6 Address: Unknown
IPv4 Address: 12.0.0.2
User-Name: user1
Status: Authorized
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Session timeout: N/A
<snip….snip>
Server Policies (priority 100)
ACS ACL: xACSACLx-IP-user1-46a243eb
Method status list:
Method State dot1x Authc Success
The following is the configuration on the wired port:
Switch#sh run int gig1/0/13
Building configuration...
Current configuration : 317 bytes
!
interface GigabitEthernet1/0/13
description dot1X Wired Port in Vlan 30
switchport access vlan 30
switchport mode access
load-interval 30
access-session host-mode single-host
access-session port-control auto
dot1x pae authenticator
spanning-tree portfast
service-policy type control subscriber 802.1x
end