© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 62 of 70
Mac Address VlanId IP Address Src If Auth Mob
-------------- ------ --------------- ------------------ -------- -------
b065.bdbf.77a3 701 20.1.1.53 0x00C9D9C000000004 RUN FOREIGN
b065.bdb0.a1ad 701 20.1.1.52 0x00C9D9C000000004 RUN FOREIGN
Since the roam is across an SPG, the mobility controller gets involved in the mobility in this case. Relevant outputs
from the mobility controller for the client visibility are displayed in the following:
MC1#show wcdb database all
Total Number of Wireless Clients = 2
MTE Clients = 2
Mac Address VlanId IP Address Src If Auth Mob
-------------- ------ --------------- ------------------ -------- -------
b065.bdbf.77a3 0 0.0.0.0 0x00CB4E4000000004 RUN MTE
b065.bdb0.a1ad 0 0.0.0.0 0x00CB4E4000000004 RUN MTE
MC1#
MC1#show wireless mobility controller summary
Number of Clients : 2
State is the Sub-Domain state of the client.
* indicates IP of the associated Sub-domain
Associated Time in hours:minutes:seconds
MAC Address State Anchor IP Associated IP Associated Time
--------------------------------------------------------------------------------
b065.bdb0.a1ad Local 20.1.5.2 20.1.8.2 00:01:24
b065.bdbf.77a3 Local 20.1.5.2 20.1.8.2 00:01:29
The preceding output displays a new option: MTE. It is defined as mobility tunnel endpoint and points to the fact
that the mobility controller has to switch the packets for these clients ingressing over the mobility agent-to-mobility
controller tunnel from foreign, and egressing out the mobility agent-to-mobility controller tunnel to anchor.
Relevant outputs at the anchor switch are the following:
MA1#show wireless client summary
Number of Local Clients : 2
MAC Address AP Name WLAN State Protocol
--------------------------------------------------------------------------------
b065.bdb0.a1ad 20.1.8.2 1 UP Mobile
b065.bdbf.77a3 20.1.8.2 1 UP Mobile
MA1#
MA1#show wcdb database all
Total Number of Wireless Clients = 2
Anchor Clients = 2