Cisco Systems C3850NM410G - page 66

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 66 of 70
MA1#show wcdb database all
Total Number of Wireless Clients = 0
Mac Address VlanId IP Address Src If Auth Mob
-------------- ------ --------------- ------------------ -------- -------
The switch where the clients initially joined has 0 clients after the roam, as seen earlier.
MA2#show wireless client summary
Number of Local Clients : 2
MAC Address AP Name WLAN State Protocol
--------------------------------------------------------------------------------
b065.bdb0.a1ad AP6073.5c90.4e87 1 UP 11n(5)
b065.bdbf.77a3 AP6073.5c90.4e87 1 UP 11n(5)
MA2#show wcdb database all
Total Number of Wireless Clients = 2
Clients Waiting to Join = 0
Local Clients = 2
Anchor Clients = 0
Foreign Clients = 0
MTE Clients = 0
Mac Address VlanId IP Address Src If Auth Mob
-------------- ------ --------------- ------------------ -------- -------
b065.bdbf.77a3 500 20.1.1.54 0x00EC328000000005 RUN LOCAL
b065.bdb0.a1ad 500 20.1.1.55 0x00EC328000000005 RUN LOCAL
The new mobility agent switch to where the client roamed displays mobility state as “LOCAL” for the two clients, as
seen earlier.
MC1#show wireless mobility controller client summary
Number of Clients : 2
State is the Sub-Domain state of the client.
* indicates IP of the associated Sub-domain
Associated Time in hours:minutes:seconds
MAC Address State Anchor IP Associated IP Associated Time
--------------------------------------------------------------------------------
b065.bdb0.a1ad Local 0.0.0.0 20.1.7.2 00:00:50
b065.bdbf.77a3 Local 0.0.0.0 20.1.7.2 00:00:50
The mobility controller switch reflects the change of switch to where the clients roamed as well as their mobility
state as “Local” on 20.1.7.2 (switch/management IP of MA2); the anchor column still displays 0.0.0.0.