Cisco Systems CISCO1841-HSEC/K9-RF manual Chassis Views, Chassis Security

Chapter 2 Overview of Cisco 1800 Series Routers (Modular)

Chassis Views

Note If the lithium battery in a Cisco 1841 router should fail, the router must be returned to Cisco for repair. Do not replace the battery yourself. Although the battery is not intended to be field replaceable, the safety agencies require the following warning be included in this document.

Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015

Chassis Security

The chassis of the Cisco 1841 router is constructed with a KensingtonTM security slot on the back panel. It can be secured to a desktop or other surface by using KensingtonTM lockdown equipment.

Chassis Views

This section contains views of the front and rear panels of Cisco 1841 router, showing the locations of the power and signal interfaces, the interface card slots, and the status indicators.

Figure 2-6shows the front panel of a Cisco 1841 router. Figure 2-7shows the back panel.

Figure 2-6 Front Panel of the Cisco 1841 Router

SYSSYS

PWRACT

1 2

Cisco 1800 Series

122329

1

System Power (SYS PWR) LED

2

System Activity (SYS ACT) LED

Figure 2-7	Back Panel of the Cisco 1841 Router
7	6	5	4	3	2	1

SLOT 1		FE 0/1	CONSOLE	SLOT 0	CISCO 1841
					100-240 VAC-
		FDX			1 A
		100			50/60 Hz
		LINK
		FDX
		100
		LINK
CF	AIM	FE 0/0	AUX
DO NOT REMOVE DURING NETWORK

8	8	9	5	12	13	122330
			11
			10

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

2-8 OL-5876-03