Cisco Systems CISCO1841-HSEC/K9-RF manual Wall-Mounting the Chassis, Chassis Grounding

Chapter 4 Chassis Installation Procedures for Cisco 1800 Series Routers (Modular)

Setting Up the Chassis

Chassis Grounding

After the router has been installed, you must connect the chassis to a reliable earth ground. For the chassis ground connection procedure, see the “Wall-Mounting the Cisco 1861 Integrated Services Router” section on page 4-8.

Wall-Mounting the Chassis

The Cisco 1841 router and the Cisco 1861 ISR can be mounted on a wall.

Warning This unit is intended to be mounted on a wall. Please read the wall mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Statement 248

Wall-Mounting the Cisco 1841 Router

To mount the Cisco 1841 router on a wall, use two number six, 3/4-inch screws and the mounting features on the bottom of the router. You must provide the screws. We recommend using pan-head or round-head screws.

The wall-mounting features on the router are shown in Figure 4-4.

Figure 4-4 Wall-Mounting Features on the Cisco 1841 Router

1

6.00 inches

103162

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

4-6 OL-5876-03