Cisco Systems CISCO1841-HSEC/K9-RF manual Safety Recommendations, Inspecting the Router, page

C H A P T E R 3

Preinstallation Requirements and Planning for Cisco 1800 Series Routers (Modular)

This chapter describes the site requirements and equipment needed to install your Cisco 1800 series integrated services router (modular). It includes the following sections:

•Safety Recommendations, page 3-1

•General Site Requirements, page 3-3

•Installation Checklist, page 3-4

•Site Log, page 3-5

•Inspecting the Router, page 3-6

•Required Tools and Equipment for Installation and Maintenance, page 3-7

Note To see translations of the warnings that appear in this publication, see Regulatory Compliance and Safety Information for Cisco 1840 Routers.

Safety Recommendations

Follow these guidelines to ensure general safety:

•Keep the chassis area clear and dust-free during and after installation.

•If you remove the chassis cover, put it in a safe place.

•Keep tools and chassis components away from walk areas.

•Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf, and roll up your sleeves.

•Wear safety glasses when working under conditions that might be hazardous to your eyes.

•Do not perform any action that creates a hazard to people or makes the equipment unsafe.

Warning Read the installation instructions before connecting the system to the power source. Statement 1004

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

OL-5876-03 3-1