Cisco Systems Conference Phone manual Before You Begin

Chapter 3 Installing Cisco Unified MeetingPlace Web Conferencing for a Segmented Meeting Access Configuration

How to Install Cisco Unified MeetingPlace Web Conferencing Release 5.3 in an SMA-2S Configuration

Copying GUIDS From the Internal Web Server to the External Web Server

The GUIDS entries for site and system must match between the internal and external web servers. Make sure that you run the GUIDS.reg file on each external web server before installing Cisco

Unified MeetingPlace Web Conferencing.

Caution You must complete this step before running the Cisco Unified MeetingPlace Web Conferencing installer on the external web server. If this step is skipped or completed incorrectly, Presentation mode will not work for internal users in external meetings. Recovering from this problem requires that you rebuild the SQL Server database.

Before You Begin

Install Cisco Unified MeetingPlace Web Conferencing on your internal web server. For instructions, see “Installing Cisco Unified MeetingPlace Web Conferencing on an Internal Server” section on page 3-8.

Procedure

Step 1 Copy the GUIDS.reg file from the internal web server (located in drive:\Program Files\Cisco Systems\MPWeb).

Step 2 Paste the GUIDS.reg file in to the external web server’s drive:\Temp directory.

Step 3 To install the GUIDS.reg file on the external web server, double-click it.

Step 4 When prompted to add the information from the GUIDS.reg file to the registry, click OK.

Step 5 Proceed to the “Installing Cisco Unified MeetingPlace Web Conferencing on an External Server” section on page 3-9.

Installing Cisco Unified MeetingPlace Web Conferencing on an External Server

Restrictions

•You must be installing Cisco Unified MeetingPlace Web Conferencing on a Cisco MCS with the required Cisco MCS OS or a later release installed and running. Requirements are described in the Release Notes for your release of Cisco Unified MeetingPlace Web Conferencing.

•You must be deploying this Cisco MCS in a network segment, such as a DMZ.

Before You Begin

See Chapter 2, “Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3” for assistance with the installation.

Procedure

Step 1 Close any open applications.

Step 2 Verify that you have synchronized the GUIDSystemID and GUIDSiteID between the internal web server and the external web server.

Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3

OL-10029-01 3-9