Adding or Editing a Device
To add or edit a new device to the Device Tree, perform the following steps:
Step 1 From the CWI - Login window,
Figure 2 Add Device Window
Step 2 Choose one of the following connection categories from the
•IP
•Console/Aux
•Scripted
Note If you choose the
Step 3 Choose the applicable connection type from the
Step 4 Click the ellipsis button to display the Login Script Steps window (see Figure 7). For more information on how to specify the login script steps, see “Specifying the User Login Script” section on page 15.
Note This step is mandatory only if you selected the Scripted connection category.
Step 5 Enter the IP address or name of the node in the Node Name/Port field.
Step 6 (Optional) From the Device Tree, check the Manage admin plane check box to enable the admin plane for the applicable device group or device. If checked, the admin plane node appears above the corresponding device node in the Inventory Tree. For more information, see “Understanding the Admin Planes and Device Planes” section on page 18.
Step 7 (Optional) Check the Lite Mode check box to force a connection to the device in Lite Mode. Step 8 Click OK to accept the device information for the Device Tree.
11