Hardware Requirements
Table 2 lists the CWI client hardware requirements.
Table 2 | CWI Client Hardware Requirements |
|
|
| |
|
|
|
|
|
|
System |
|
|
|
| Monitor Display |
Requirement | CPU and CPU Speed MHz | RAM | Drive Space | Settings | |
|
|
|
|
| |
IBM | 256 MB minimum, | CWI=5MB, | 1024 by | ||
PC |
| 1.20 GHz Pentium IV recommended | 512 MB recommended | JRE=48MB. | 768 pixels |
|
|
|
|
|
|
UNIX |
| Solaris 550 MHz minimum, | 256 MB minimum, | CWI=5MB, | 1024 by |
|
| 1.2 GHz recommended | 512 MB recommended | JRE=48MB | 768 pixels |
|
|
|
|
| |
IBM | 256 MB minimum, | CWI=5MB, | 1024 by | ||
|
| 1.20 GHz Pentium IV recommended | 512 MB recommended | JRE=48MB | 768 pixels |
|
|
|
|
|
|
Macintosh |
| 500 MHz minimum, | 256 MB minimum, | CWI=5MB, | 1024 by |
|
| 1.20 GHz recommended | 512 MB recommended | JRE=48MB | 768 pixels |
|
|
|
|
|
|
Software Requirements
Table 3 lists the CWI client software requirements.
Table 3 | CWI Client Software Requirements |
| |
|
|
| |
System Requirement | Operating System | Additional Software | |
|
|
| |
Windows 2000 or Windows XP | One of these browsers: | ||
|
|
| • Microsoft Internet Explorer 5.0 or higher |
|
|
| • Netscape Navigator 7.0 or higher |
|
|
| JRE version 1.5 |
|
|
| |
Red Hat Linux Release 7.1 or any Linux operating | Netscape Navigator | ||
|
| system on which JRE 11.5 runs | JRE version 1.5 |
|
|
| |
|
|
| See the Sun website for the latest minimum system |
|
|
| requirements for the JRE on Linux. |
|
|
|
|
Macintosh |
| MAC OS X 10 | Safari version 1.2.3 |
|
|
| JRE version 1.5 |
|
|
| |
1. JRE = Java Runtime Environment |
| ||
4Configuring the Router and CWI Client
To install CWI and for CWI to manage a router, specific configuration pieces must be active on the router. If you want to use the serial port or terminal server connection method after installation, no further router configuration is required. For all other connection methods, ensure that the router is configured, as described in this section.
The “Troubleshooting Basic IP Connectivity” section on page 24 provides information on resolving connectivity problems. See Cisco IOS XR System Management Configuration Guide for information on the capabilities of, installation of
Cisco IOS XR software packages on, and bootup of the router.
These sections describe how to set up client connections on the router:
•Enabling the HTTP Server, page 5
•Setting Up the Common Configuration for IP Connection Methods, page 5
•Connection Methods, page 6
•Setting Up the Minimum Crypto Requirements, page 6
4
