Cisco TelePresence SX20 Quick Set

Administrator guide

Controlling and monitoring a call

You can control and monitor several call features using the Call Control page.

Adjusting the sound volume

Use + and - on the volume control bar to adjust the sound volume of your system (not the keyboard + and - keys).

Muting the microphone

Use the Mute button when you want to deactivate the microphone for privacy reasons.

When the microphone is muted, the button is replaced by an Unmute button. Use this button to re-activate the microphone.

Controlling the camera

First, press the Camera Control button. Then, in the window that opens, use + and - to adjust the zoom and the arrow keys to adjust the camera’s angle.

If a camera preset is defined it is listed to the right. Apply the preset by clicking its name.

Call settings

When you load the Call Control page, the default call bit rate and the default call protocol are shown in the Call bit rate and Call protocol fields, respectively. If preferred, you can select another bit rate or another protocol from the drop down lists. You can not change these settings during a call.

Call details

Press Show details while in a call to provide information on call rate, encryption, as well as important video and audio parameters.

Hide details removes the information.

Show/hide call details

Call bit rate

Call protocol

Call Control

17

Volume control

Microphone mute

Camera control

D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved.

www.cisco.com