Cisco Systems SIP, Power, Far-end, 1/3” CMOS, •4 ⋅ zoom, +15°/-25°, •ClearPath, •1/3” CMOS, •12 ⋅ zoom, •1/3” CMOS, +/- 90° pan, •+/- 90° pan, •+/- 90° pan, www.cisco.com

Cisco TelePresence SX20 Quick Set

Administrator guide

Table of contents Introduction Web interface Advanced settings Appendices

76

•Dynamic Host Configuration Protocol (DHCP)•IEEE 802.1x network authentication•IEEE 802.1q VLAN•IEEE 802.1p QoS and class of service•ClearPathIPv6 network support•Single call stack support for both H.323 and

SIP

•Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP, HTTPS, DNS and DiffServ

•Support for both static and autoconfiguration (stateless address autoconfiguration)

Cisco unified communications manager (requires Cisco UCM version 8.6 or later)•Native registration with Cisco Unified Communications Manager

•Basic Cisco Unified Communications Manager provisioning

•Firmware upgrade from Cisco Unified Communications Manager•Cisco Discovery Protocol and DHCP option 150 support

•Basic telephony features such as hold, resume, transfer, and corporate directory lookup

Security features•Management using HTTPS and SSH•IP administration password•Menu administration password•Disable IP services•Network settings protectionNetwork interfaces•One LAN and Ethernet (RJ-45) 10/100/1000 MbpsOther interfaces•Two USB host for future use

PrecisionHD 1080p 12x camera•1/3” CMOS•12 ⋅ zoom•+15°/-25° tilt•+/- 90° pan•43.5° vertical field of view•72° horizontal field of view•Focus distance 0.3 m – infinity•1920 ⋅ 1080 pixels progressive at 60 fps

•Other formats supported (configurable through Dip-switch): 1920 ⋅ 1080@60 fps (HDMI only), 1920 ⋅ 1080@50 fps (HDMI only), 1920 ⋅ 1080@30 fps, 1920 ⋅ 1080@25 fps, 1280 ⋅ 720@60 fps, 1280 ⋅ 720@50 fps, 1280 ⋅ 720@30 fps, 1280 ⋅ 720@25 fps

•Automatic or manual focus / brightness / white balance•Far-end camera control•Dual HDMI and HD-SDI output•Upside-down mounting with automatic flipping of picturePrecisionHD camera 1080p 4xS2

•1/3” CMOS

•4 ⋅ zoom

•+15°/-25° tilt

•+/- 90° pan

•43.5° vertical field of view

•70° horizontal field of view

•Focus distance 0.3 m – infinity

•1920 ⋅ 1080 pixels progressive at 60 fps

•Automatic or manual focus / brightness / white balance

•Far-end camera control

•Upside-down mounting with manual flipping of picture

System management•Support for the Cisco TelePresence Management Suite•Total management using embedded SNMP, Telnet, SSH, XML and SOAP•Remote software upload using web server, SCP, HTTP and HTTPSDirectory services•Support for local directories (My Contacts)•Corporate directory

•Unlimited entries using server directory supporting Lightweight Directory Access Protocol (LDAP) and H.350 (available with Cisco TelePresence Management Suite)

•Unlimited number for corporate directory (available with Cisco TelePresence Management Suite)

•Received calls with date and time•Placed calls with date and time•Missed calls with date and timeUser interface•Remote control and on-screen menu•Cisco TelePresence Touch (optional)

Power•Autosensing power supply•100 – 240 VAC, 50/60 Hz•Maximum 40 watts for codec and main cameraTemperature rangeOperating temperature and humidity:•Ambient temperature: 32°F to 95°F (0°C to 35°C)•Relative humidity (RH): 10% to 90%Storage and transport temperature:•–4°F to 140°F (–20°C to 60°C) at RH 10% to 90% (non-condensing)SX20 Codec dimensions•Width: 300 mm / 11.8 in.•Height: 34 mm / 1.4 in.•Depth: 180 mm / 7.1 in.•Weight: 1.4 kg / 3.1 lb

D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com