Cisco TelePresence SX20 Quick Set

Administrator guide

Table of contents

Introduction

Web interface

Advanced settings

Appendices

7

 

 

 

 

 

 

Starting the web interface

The web interface provides full configuration access to your video conference system.

You can connect from a computer and administer the system remotely.

In the following you will find information how to use the web interface for system configuration and maintenance.

1. Connect to the video system

Open a web browser and enter the IP address of the video system in the address bar.

To find the IP address (IPv4 or IPv6), tap More > Settings > System Information on a Touch controller; or navigate to Home > Settings > System information when using a remote control and the on-screen menu.

2. Sign in

Enter the user name and password for your video system and press Sign In.

The system is delivered with a default user named admin with no password (i.e. leave the Password field blank when signing in for the first time).

NOTE: We strongly recommend that you set a password for the admin user to restrict access to system configuration, see the next page.

Sign out

Click on your user name and select Sign out from the drop down menu.

D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved.

www.cisco.com