Cisco TelePresence SX20 Quick Set
Administrator guide
Table of contents | Introduction | Web interface | Advanced settings | Appendices |
| 70 |
|
|
|
|
| ||||||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
Setting the system password
You need a username and password to sign in to the web and command line interfaces of your system.
The video conference system is delivered with a default user account with username admin and no password set. This user has full access rights to the system.
Note: We strongly recommend that you set a password for the admin user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe place. You have to contact your Cisco representative if you have forgotten the password.
Changing your system password
Perform the following steps to change the system password.
If a password is currently not set, use a blank Current password; to remove a password, leave the New password fields blank.
1.Sign in to the web interface with your username and current password.
2.Click your username in the upper right corner and select Change password in the drop down menu.
3.Enter the Current password, the New password, and repeat the new password in the appropriate input fields. The password format is a string with
4.Click Change password.
Changing another user’s system password
Read more about creating more user accounts in the User administration section.
If you have ADMIN rights, you can change all users’ passwords by performing the following steps:
1.Sign in to the web interface with your username and password.
2.Go to the Maintenance tab and select User Administration.
3.Select the appropriate user from the list.
4.Enter a new password and PIN code.
5.Click Save.
D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved. | www.cisco.com |