Cisco TelePresence SX20 Quick Set
Administrator guide
Table of contents | Introduction | Web interface | Advanced settings | Appendices |
| 72 |
|
|
|
|
| ||||||
|
|
| ||||||
|
|
|
|
|
|
|
|
|
Setting a root password
You can protect the file system of your video system by setting a password for the root user. The root user is disabled by default. You have to use the command line interface to enable the root user and set a root password.
Setting a root password
Perform the following steps to activate the root user and set a password for it:
1.Connect to the system through the network or the serial data port, using a command line interface (SSH or Telnet).
2.Sign in to the system with username and password. The user needs ADMIN rights.
3.Type the following command:
systemtools rootsettings on <password>
NOTE: The root password is not the same as the system (admin) password.
D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved. | www.cisco.com |