Cisco TelePresence SX20 Quick Set

Administrator guide

Capturing snapshots

The snapshot feature, which is disabled by default, allows snapshots captured by your video system to be displayed on the Call Control page. Captures from your video system’s camera as well as from its presentation channel will by displayed.

This feature might come in handy when administering the video system from a remote location, e.g. to check the camera view.

To use web snapshots you have to sign in with ADMIN credentials.

Enabling the snapshot feature

The snapshot feature is disabled by default, and must be enabled using the Touch controller or the remote control and on screen menu.

•Touch controller: Tap More > Settings > Administrator Settings > Web Snapshots and select On.

•Remote control and on screen menu: Go to the Advanced configuration menu, navigate to Video > AllowWebSnapshots and select On.

Far end snapshots while in a call

While in a call, snapshots of the remote participant’s main camera and presentation channel (far end) will be captured and displayed as shown in the illustration. The snapshots are updated approximately every 20 seconds.

Note: Far end snapshots are captured even if web snapshots are disallowed on the far end video system. Web snapshots are prohibited only for encrypted calls.

Call Control

19

Far end snapshots

Take live snapshots

While the Live snapshots box is checked, snapshots are captured by your video system (main camera and presentation) approximately every two seconds.

Snapshots from your video system

D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved.

www.cisco.com