Cisco TelePresence SX20 Quick Set
Administrator guide
The audit certificate listIf you want to use the ExternalSecure audit logging mode, you must upload a list of trusted audit certificates to the video conference system. This list must cover all audit servers that your system shall trust.
In the ExternalSecure audit logging mode audit logging information will only be sent to entities holding a valid audit certificate.
Note: You must always upload the audit certificate list before enabling secure audit logging.
About audit logging
Audit logging records all sign in activity and configuration changes on the system.
22 
1. Upload the audit certificate list
To install the audit certificate, you will need:
•Audit list file ( .PEM format)
Contact your system administrator to obtain the required file.
i.Press Browse... and locate the file with the audit list file (.PEM format).
ii.Press Upload to store the certificate on your system.
Audit logging is disabled by default. You can enable audit logging using the
2. Enable secure audit logging
When you have uploaded the audit certificate list you must enable secure audit logging:
i.Select Advanced Configuration under the Configuration tab. Then select Security in the list of settings groups on the left hand side.
ii.Enter the Address and Port number of the audit server.
iii.Select ExternalSecure from the Logging Mode drop down list.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
iii 
ii
i 
D14908.01 SX20 Administrator Guide (TC5.1) 2012 FEBRUARY © 2012 Cisco Systems, Inc. All rights reserved. | www.cisco.com |