Cisco Systems Network Switch Cabling manual Switch Panel and Control Node Cabling

application nodes. Note that detailed instructions for adding application nodes are in a separate document, which you should consult when you are ready to cable application nodes into your Cassatt Active Response environment. (Figure 1 highlights the control node and network switches, but also suggests application node cabling.)

Figure 1 Switch Panel and Control Node Cabling

	Switch stack 1
	1		3		5		7	9		11		13			15	17	19				21	23
1		ISL-1	C1	-1		N1-1	N5-1	N9-1			N13-1		N17	-1	N21-1				N20	-P	N12-P		N3-P
Switch
		GW-1	C2	-1		N3-1	N7-1	N11-1			N15-1		N19	-1	N23-1				N16	-P	N8-P
		2	4			6	8	10			12
												14			16	18	20				22	24
	1		3		5		7	9		11		13			15	17	19				21	23
Switch 2		ISL-2				N2-1	N6-1	N10	-1		N14-1		N18	-1	N22-1				N19	-P	N11-P		N1-P
						N4-1	N8-1	N12	-1		N16-1		N20	-1		N23-P			N15	-P	N7-P		C2-P
	2		4		6		8	10		12		14			16	18		20			22		24
	Switch stack 2
	1		3		5		7	9		11		13			15	17	19				21	23
3		ISL-1	C1	-2		N1-2	N5-2	N9-2			N13-2		N17	-2	N21-2				N18	-P	N10-P		N4-P
Switch
		GW-2	C2	-2		N3-2	N7-2	N11-2			N15-2		N19	-2	N23-2	N22-P			N14	-P	N6-P
		2	4		6		8	10			12		14		16	18			20		22		24
	1		3		5		7	9		11		13			15	17	19				21	23
4		ISL-2				N2-2	N6-2	N10	-2		N14-2		N18	-2	N22-2				N17	-P	N9-P		N2-P
Switch
						N4-2	N10-2	N14	-2		N16-2		N20	-2		N21-P			N13	-P	N5-P		C1-P
		2	4			6	8	10			12		14		16	18		20			22
																							24

Control node 1

Gb 2 C1-2 Gb1 C1-1 C1-P

Control node 2

Gb 2 C2-2 Gb1 C2-1 C2-P

Legend:	Nn-1 = Application node NIC
Blue = Gateway (GW)
Yellow = Cisco interswitch link (ISL)	Nn-2 = Application node NIC
Green = Control node (C)	Nn-P = Application node remote management controller
Red = Remote management controller

CASSATT ACTIVE RESPONSE CONTROL NODE AND NETWORK SWITCH CABLING EXAMPLE 17