Chapter
Getting Started Guide | 3 |
|
3.From the RAID Level
4.Click Add.
The RAID creation can take some time to complete (depending on the size of the disks and the selected RAID level). You can monitor the progress of the RAID build from the Storage Status page. When the build is finished, the array appears in the RAID Arrays table. The disks used in the array are no longer available for creating additional arrays.
Step 5: Create a Volume
After you define at least one RAID array, you can create a volume. You need to create at least one volume before you can create users, groups, or shares.
To create a volume:
1. From the Manager Menu, click Storage Volumes.
The Storage Volumes page appears.
2.From the New Volume area, set up the following fields:
•Array: Click the
•Name: Enter the name you want to give the volume. The volume name must consist of at least one alphanumeric character, must begin with a letter, but cannot contain any spaces.
Chapter 3: Configuring the Network Storage System | 21 |
(NSS) |
|
