Cisco Systems OL-4552-01 manual Restoring Node Configurations from CWM, 10-10

Chapter 10 Cisco WAN Manager Operations

Saving and Restoring Configurations

Related Topics

•“Saving and Restoring Configurations” section on page 10-1

•“Managing with the Configuration Save and Restore Utility” section on page 10-2

•“Launching the Configuration Save and Restore Utility” section on page 10-2

•“Saving Node Configurations from CWM” section on page 10-3

•“Restoring Node Configurations from CWM” section on page 10-10

•“Downloading Software and Firmware” section on page 10-12

Restoring Node Configurations from CWM

You can restore node configurations that are used to transfer the configuration data file to the switch and to restore all of the configurations that are based on the data.

Procedure

To restore node configurations, complete the following procedure:

Step 1 Click the In-Progresstab to verify that there is no save or restore operation currently in progress. Step 2 Click the Config Restore tab.

Figure 10-3displays the Configuration Restore window.

	Cisco WAN Manager User’s Guide
10-10	Release 15, Part Number OL-4552-01 Rev. C0, January 27, 2005