Chapter 10 Cisco WAN Manager Operations
Downloading Software and Firmware
•“Managing with the Image Download” section on page
•“Deleting Images” section on page
Preparing the Cisco BPX and Cisco IGX Switch to Download Software or Firmware
To prepare the Cisco BPX and Cisco IGX switch to download software or firmware, complete the following procedure:
Note This procedure is applicable only to Cisco IGX and Cisco BPX switches and is required regardless of how the software image transfer is initiated.
Step 1 Access the switch CLI by attaching a dumb terminal to the switch or telnet to the switch.
Administration > Telnet to telnet to the switch. A terminal window is displayed.
Step 2 When you establish a CLI session, you must:
a.Enter the username at the prompt.
b.Enter the password at the prompt.
Step 3 Enter the cnffunc command to enable the switch for downloading.
Step 4 For a Cisco BPX node, enter index value 6 for the Download From Remote Cisco StrataView Plus function.
For a Cisco IGX node, enter index value 8 for the Download From Remote CWM function.
Step 5 For a Cisco BPX node, enter e to enable the Download From Remote Cisco StrataView Plus function. For a Cisco IGX node, enter e to enable the Download From Remote CWM function.
Once the cnffunc command is executed, the switch allows downloading from a CWM workstation, provided the latter is connected to another switch in the same network.
The following example is used for the Cisco BPX node:
node TN | Cisco |
| BPX 8620 9.4.00 | Feb. 14 2003 16:36 GMT | |
Index | Status | Function |
|
| |
1 | Enabled | Automatic TRK Loopback Test on Local/Remote Alarms | |||
2 | Enabled | User Command Logging |
| ||
3 | Enabled | Automatic Card Reset on Hardware Error | |||
4 | Enabled | Card Error | Record Wraparound |
| |
5 | Disabled | Card Test After Failure |
| ||
6 | Enabled | Download From Remote Cisco StrataView Plus | |||
7 | Disabled | Logging of | conn events in local event log | ||
8 | Disabled | Logging of | conn events in Cisco StrataView Plus event log | ||
9 | Disabled | Force Download From a Specific IP address | |||
This Command: cnffunc 6 e
Next Command:
| Cisco WAN Manager User’s Guide |
| Release 15, Part Number |
